Skip to content

Beiter Tri Liner Tool

by Beiter
$52.99
SKU CAO3119HQ
Availability: Translation missing: en.general.icons.icon_check_circle icon 4 in stock, ready to be shipped

Notify me when back in stock

The Beiter Tri-Liner is used to mark the exact position of vanes of any length on arrow shafts up to 7.2mm (9/32") diameter. With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.

Specifications

  • Included red tabs for exact positioning of the fletching in length and distance to the nock and to help to draw the line in the correct length
  • You may clean the tool with Acetone if desired
  • Instructions included

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim B. (Quebec)
Straight and level.

Great little addition to the tool box. Very handy to have and easy to use.

C
Charles (Ontario)
Works Well

This is made of plastic so I was cautious using it, since the hinges look a bit fragile. But it all worked great. It works on arrows that have a nock, and you get different size nock adapters. It comes with red plastic clip ons that you use to set the length of the lines you're going to draw. I had trouble getting it as far down the shaft, closer to the nock, as I wanted.

The Spigarelli is made of metal and indexes an a spike into a bare shaft. It comes without anything like the red clips so I wrapped masking tape around my shafts.

In most things Beiter is gold standard. This works well.

Special orders receive top priority and are given prompt attention. While larger items like bows may not always be readily available, many special order items are consistently kept in stock. The general turnaround time for special orders is a minimum of 8 weeks, depending on the lead times set by the manufacturer.

Certain bows, such as custom target bows and high-quality traditional recurve bows, are exclusively made to order directly from the manufacturer.

In some instances, left-handed products like premium target equipment may experience unforeseen delays due to batch production by the manufacturer.

We strive to meet the deadlines mentioned above and make every effort to do so. However, there may be circumstances beyond our control that prevent us from meeting those deadlines. If such a situation arises, we will make every effort to rectify the issue. Special orders can be canceled or exchanged and are eligible for a refund after 8 weeks.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim B. (Quebec)
Straight and level.

Great little addition to the tool box. Very handy to have and easy to use.

C
Charles (Ontario)
Works Well

This is made of plastic so I was cautious using it, since the hinges look a bit fragile. But it all worked great. It works on arrows that have a nock, and you get different size nock adapters. It comes with red plastic clip ons that you use to set the length of the lines you're going to draw. I had trouble getting it as far down the shaft, closer to the nock, as I wanted.

The Spigarelli is made of metal and indexes an a spike into a bare shaft. It comes without anything like the red clips so I wrapped masking tape around my shafts.

In most things Beiter is gold standard. This works well.

The Beiter Tri-Liner is used to mark the exact position of vanes of any length on arrow shafts up to 7.2mm (9/32") diameter. With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.

Specifications

  • Included red tabs for exact positioning of the fletching in length and distance to the nock and to help to draw the line in the correct length
  • You may clean the tool with Acetone if desired
  • Instructions included

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim B. (Quebec)
Straight and level.

Great little addition to the tool box. Very handy to have and easy to use.

C
Charles (Ontario)
Works Well

This is made of plastic so I was cautious using it, since the hinges look a bit fragile. But it all worked great. It works on arrows that have a nock, and you get different size nock adapters. It comes with red plastic clip ons that you use to set the length of the lines you're going to draw. I had trouble getting it as far down the shaft, closer to the nock, as I wanted.

The Spigarelli is made of metal and indexes an a spike into a bare shaft. It comes without anything like the red clips so I wrapped masking tape around my shafts.

In most things Beiter is gold standard. This works well.

Special orders receive top priority and are given prompt attention.

While larger items like bows may not always be readily available, many special order items are consistently kept in stock.

The general turnaround time for special orders is a minimum of 8 weeks, depending on the lead times set by the manufacturer.

Certain bows, such as compound bows, olympic recurve risers and limbs as well as traditional recurve bows, are exclusively made to order directly from the manufacturer if "special order" is indicated. They cannot be cancelled or refunded if special ordering. 

We strive to meet the deadlines mentioned above and make every effort to do so. Due to extreme lack of availability and stock within the Archery industry, lead times are only estimates. 

Cancelling special order items depends on the product type. For those that can be cancelled, the following fee's may apply.

  • A 5 percent restocking fee will be charged if the order has been fulfilled.
  • A 2.5 percent admin fee will apply to backorders cancelled within 8 weeks. 

Some products such as custom made, made-to-order or special order bows cannot be cancelled. Many of these items are brought in from overseas or made specially by the manufacturer upon an order being placed.